Inserts

Stop drill bit – required for installation of HDA undercut anchors

Stop drill bit for HSC installation (TE-C)

Stop drill bit – required for installation of HDA undercut anchors

SDS Plus (TE-C) hammer drill stop bit for HKD-TE-CX long HKD setting tools

SDS Plus (TE-C) stop bit for HKD anchors

Stepped drill bit for pre-drilling holes for new-generation X-BT fasteners

Stepped drill bit for predrilling accurate holes for X-BT fasteners

Ultimate SDS Plus (TE-C) hollow drill bit for virtually dust-free hammer drilling in concrete

Ultimate SDS Max (TE-Y) hollow drill bit for virtually dust-free drilling in concrete

Customised screwdriver bits for Hilti screw fastening systems

PFP removal drill bits for predrilling accurate holes and removing coatings from PFP coated steels

PFP removal drill bits for predrilling accurate holes and removing coatings from PFP coated steels

Stepped drill bits for predrilling accurate holes or removing coatings for S-BT threaded screw-in studs on aluminum and steel

Shank for sockets

1/2" long impact socket for tightening bolts and anchors

1/2" (inch) short impact socket for tightening bolts and anchors

Accessory for impact sockets

Bit holder and accessories for use with screw fastening inserts

Nut setter with magnetic screw retention for use with hex-head screws

Nut setter with non-magnetic / ball-lock screw retention for use with hex-head screws

3/8" (inch) short impact socket for tightening bolts and anchors

Nut setter for tightening flange nuts on threaded studs

Torque-controlled socket wrench for setting HSA anchors